Launch BST360, suitable for technicians and on the go consumers, is safe to use with its anti-heat characteristics and prevention against backfire electrical sparks that can occur during electrical system diagnosis
1. Launch X431 MCU3 Adapter works with X-PROG3 as readings of new ECUs TCM, Mercedes all keys lost etc.
2. It's optional part, the mcu3 adapter is not included with the xprog3.
Godiag CAS2 CAS3 SER Semi Smart Test Platform is a dedicated device developed for BMW locksmiths, maintenance engineers and CAS2/CAS3, CAS3+ CAS3++ programming engineers. This product is suitable for magnetic semi-intelligent or smart keys. Note: This platform does not support mechanical key CAS2.
VVDI Prog 35160DW Chip Support for replacing the following chips: M35080, M35080-3, M35080-6, M35080V6, M35080VP, D80D0WQ, 160D0WQ, 35160WT.
Autel APB112 Smart Key Simulator Simple Version Work with Autel IM608 IM508, APB112 smart key simulator is used to collect the data sent from the ignition coil, aiming to identify the ignition coil troubles and decode the data of the vehicle key chip.
Autel XP400Pro key and chip programmer, compatible with the IM508, IM608, IM508S, IM608 II, reads/writes and learns keys to the vehicle. Autel XP400 Pro enables programming of infrared keys for Mercedes vehicles and IC Chip keys on late model Hyundai KIA vehicles. The XP400 also performs EEPROM-data functions needed for European vehicles. The XP400Pro supports Data Read/Write of 3,000 Plus Chip Types (inc. EEPROM, engine ECU, MCU, IMMO ECU).
GODIAG GD101 J2534 Compatible with J2534 Passthru & ELM327 Diagnose J1979 Compatible Vehicles Switch Mode Automatically
Autel MaxiBAS BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery's cold cranking ability and reserve capacity, vital to determining a battery's true health.
Autel IMKPA KEY PROGRAMMING ACCESSORIES KIT, compatible with the XP400Pro Key and Chip Programmer, includes 12 adapters for the XP400Pro that enables Read/ Write/ Erase for Mercedes Benz ESL_W209/ W906 Data, Mercedes Benz NEC Key Learning, BMW EWS3 Key Learning and Volkswagen/ AUDI/ BMW/ Benz Key Unlock.
OBDSTAR CAN FD adapter is designed for diagnosing ECU systems of cars meeting with CAN FD protocols. It can be used with X300 DP Plus, X300 PRO4 and X300 DP for key programming and P50 for airbag reset as well.
Launch LTR-03 RF Sensor is designed and produced RF-Sensor that provides 98% vehicle coverage to offer the best TPMS solutions for any repair shops or tire shops. It can combine both 315MHz and 433MHz frequencies in one sensor.